Erythromycin Estolate Capsules
» Erythromycin Estolate Capsules contain the equivalent of not less than 90.0 percent and not more than 115.0 percent of the labeled amount of erythromycin (C37H67NO13).
Packaging and storage—
Preserve in tight containers.
') + '&img=../../images/v35300/cas-114-07-8.gif',600,500);)
') + '&img=../../images/v35300/cas-3521-62-8.gif',600,500);)
Identification—
Prepare a test solution by mixing a quantity of Capsule contents with methanol to obtain a concentration equivalent to about 20 mg of erythromycin per mL. Prepare a Standard solution of USP Erythromycin Estolate RS in methanol containing the equivalent of 20 mg of erythromycin per mL. Apply separately 3 µL of each solution to a thin-layer chromatographic plate (see Chromatography 
621
) coated with a 0.25-mm layer of chromatographic silica gel. Proceed as directed in the Identification test under Erythromycin Delayed-Release Capsules, beginning with “Place the plate in an unlined chromatographic chamber.”
621) coated with a 0.25-mm layer of chromatographic silica gel. Proceed as directed in the Identification test under Erythromycin Delayed-Release Capsules, beginning with “Place the plate in an unlined chromatographic chamber.”
Disintegration 701:
30 minutes, proceeding as directed for Hard Gelatin Capsules, except to use disks and to use simulated gastric fluid TS as the immersion fluid instead of water.
701:
30 minutes, proceeding as directed for Hard Gelatin Capsules, except to use disks and to use simulated gastric fluid TS as the immersion fluid instead of water.
Uniformity of dosage units 905:
meet the requirements.
905:
meet the requirements.
Water, Method I 921:
not more than 5.0%, 20 mL of methanol containing 10% of imidazole being used in place of methanol in the titration vessel.
921:
not more than 5.0%, 20 mL of methanol containing 10% of imidazole being used in place of methanol in the titration vessel.
Assay—
Place not less than 4 Capsules in a high-speed glass blender jar with 200.0 mL of methanol, and blend for 3 minutes. Add 300.0 mL of Buffer No. 3, and blend for 3 minutes. Allow this solution to stand at room temperature for 18 hours. Proceed as directed for erythromycin under Antibiotics—Microbial Assays 81, using an accurately measured volume of this stock test solution diluted quantitatively with Buffer No. 3 to yield a Test Dilution having a concentration assumed to be equal to the median dose level of the Standard.
81, using an accurately measured volume of this stock test solution diluted quantitatively with Buffer No. 3 to yield a Test Dilution having a concentration assumed to be equal to the median dose level of the Standard.
Auxiliary Information—
Please check for your question in the FAQs before contacting USP.
| Topic/Question | Contact | Expert Committee |
|---|---|---|
| Monograph | Ahalya Wise, M.S.
Senior Scientific Liaison 1-301-816-8161 |
(SM12010) Monographs - Small Molecules 1 |
| Reference Standards | RS Technical Services 1-301-816-8129 rstech@usp.org |
|
| 701 |
Margareth R.C. Marques, Ph.D.
Senior Scientific Liaison 1-301-816-8106 |
(GCDF2010) General Chapters - Dosage Forms |
USP35–NF30 Page 3084