Malathion
Click to View Image
C10H19O6PS2 330.36

Butanedioic acid, [(dimethoxyphosphinothioyl)-thio], diethyl ester, (±)-.
Diethyl (±)-mercaptosuccinate, S-ester with O,O-dimethyl phosphorodithioate [121-75-5].
» Malathion contains not less than 98.0 percent and not more than 102.0 percent of C10H19O6PS2.
Packaging and storage— Preserve in tight, light-resistant containers.
Identification, Infrared Absorption 197F.
Specific gravity 841: between 1.220 and 1.240.
Water, Method I 921: not more than 0.1%.
Limit of isomalathion—
Mobile phase— Prepare a suitable degassed solution of methanol and water (50:30). Make adjustments if necessary (see System Suitability under Chromatography 621).
Standard preparation— Dissolve an accurately weighed quantity of USP Isomalathion RS in methanol to obtain a solution having a known concentration of about 0.1 mg per mL.
Test preparation— Dissolve an accurately weighed quantity of Malathion in methanol to obtain a solution having a known concentration of about 20 mg per mL.
Chromatographic system (see Chromatography 621)—The liquid chromatograph is equipped with a 210-nm detector and a 4-mm × 30-cm column that contains 10-µm packing L1. The flow rate is about 1 mL per minute. Chromatograph the Standard preparation, and record the peak responses as directed for Procedure: the relative retention times are about 0.5 for isomalathion and 1.0 for malathion; and the relative standard deviation for replicate injections is not more than 2.0%.
Procedure— Separately inject equal volumes (about 20 µL) of the Standard preparation and the Test preparation into the chromatograph, record the chromatograms, and measure the responses of the major peaks. Calculate the percentage of isomalathion in the Malathion taken by the formula:
(CS / CU)(P)(rU / rS)
in which CS is the concentration, in mg per mL, of USP Isomalathion RS in the Standard preparation; CU is the concentration, in mg per mL, of specimen in the Test preparation; P is the stated purity, in percentage, of the USP Isomalathion RS; and rU and rS are the isomalathion peak responses obtained from the Test preparation and the Standard preparation, respectively: not more than 0.3% of isomalathion is found.
Assay—
Mobile phase— Prepare a suitable degassed solution of methanol and water (50:30). Make adjustments if necessary (see System Suitability under Chromatography 621).
Internal standard solution— Dissolve propylparaben in Mobile phase to obtain a solution containing about 0.6 mg per mL.
Standard preparation— Transfer about 100 mg of USP Malathion RS, accurately weighed, to a 10-mL volumetric flask, add 1.0 mL of Internal standard solution, dilute with methanol to volume, and mix.
Assay preparation— Transfer about 500 mg of Malathion, accurately weighed, to a 50-mL volumetric flask, add 5.0 mL of Internal standard solution, dilute with methanol to volume, and mix.
Chromatographic system (see Chromatography 621)—The liquid chromatograph is equipped with a 254-nm detector and a 4-mm × 30-cm column that contains 10-µm packing L1. The flow rate is about 1 mL per minute. Chromatograph the Standard preparation, and record the peak responses as directed for Procedure: the relative retention times are about 0.6 for propylparaben and 1.0 for malathion; and the resolution, R, of the propylparaben and malathion peaks is not less than 4, and the relative standard deviation for replicate injections is not more than 2.0%.
Procedure— Separately inject equal volumes (about 20 µL) of the Standard preparation and the Assay preparation into the chromatograph, record the chromatograms, and measure the responses for the major peaks. Calculate the quantity, in mg, of C10H19O6PS2 in the portion of Malathion taken by the formula:
50C(RU /RS)
in which C is the concentration, in mg per mL, of USP Malathion RS in the Standard preparation; and RU and RS are the ratios of the peak responses of malathion to propylparaben obtained from the Assay preparation and the Standard preparation, respectively.
Auxiliary Information— Please check for your question in the FAQs before contacting USP.
Topic/Question Contact Expert Committee
Monograph Behnam Davani, Ph.D., M.B.A.
Senior Scientist
1-301-816-8394
(MDAA05) Monograph Development-Antivirals and Antimicrobials
Reference Standards Lili Wang, Technical Services Scientist
1-301-816-8129
RSTech@usp.org
USP32–NF27 Page 2841
Chromatographic Column—
Chromatographic columns text is not derived from, and not part of, USP 32 or NF 27.