Bisacodyl Rectal Suspension
» Bisacodyl Rectal Suspension is a suspension of Bisacodyl in a suitable aqueous medium. It contains not less than 90.0 percent and not more than 115.0 percent of the labeled amount of C22H19NO4.
Packaging and storage—
Preserve in unit-dose containers at a temperature not exceeding 30
.
.
USP Reference standards 
11
—
11—
USP Bisacodyl RS 
') + '&img=../../images/v35300/cas-603-50-9.gif',600,500);)
Identification—
The retention time of the major peak in the chromatogram of the Assay preparation corresponds to that of the Standard preparation as obtained in the Assay.
pH 791:
between 5.0 and 6.8.
791:
between 5.0 and 6.8.
Assay—
Mobile phase—
Prepare a filtered and degassed mixture of methanol and 0.01 M monobasic potassium phosphate (60:40). Make adjustments if necessary (see System Suitability under Chromatography 621).
621).
Internal standard solution—
Dissolve a suitable quantity of ethylparaben in methanol, and dilute with an equal volume of water to obtain a solution containing about 5.0 mg per mL.
Standard preparation—
Dissolve an accurately weighed quantity of USP Bisacodyl RS in methanol, add an accurately measured volume of Internal standard solution, and dilute quantitatively, and stepwise if necessary, with methanol to obtain a solution having known concentrations of about 67 µg per mL and 250 µg per mL for bisacodyl and ethylparaben, respectively.
Assay preparation—
Transfer an accurately measured volume of Rectal Suspension, equivalent to 6.7 mg of bisacodyl, to a 100-mL volumetric flask. Add 5.0 mL of Internal standard solution, dilute with methanol to volume, and mix.
Chromatographic system
(see Chromatography 621)—The liquid chromatograph is equipped with a 254-nm detector and a 3.9-mm × 30-cm column containing packing L1. The flow rate is about 2 mL per minute. Chromatograph the Standard preparation, and record the peak responses as directed for Procedure: the relative retention times are about 2.0 for bisacodyl and 1.0 for ethylparaben; the resolution, R, between bisacodyl and the internal standard is not less than 7.0; the column efficiency, determined for the analyte peak, is not less than 2000 theoretical plates; the tailing factor is not more than 1.2; and the relative standard deviation for replicate injections is not more than 2.0%.
621)—The liquid chromatograph is equipped with a 254-nm detector and a 3.9-mm × 30-cm column containing packing L1. The flow rate is about 2 mL per minute. Chromatograph the Standard preparation, and record the peak responses as directed for Procedure: the relative retention times are about 2.0 for bisacodyl and 1.0 for ethylparaben; the resolution, R, between bisacodyl and the internal standard is not less than 7.0; the column efficiency, determined for the analyte peak, is not less than 2000 theoretical plates; the tailing factor is not more than 1.2; and the relative standard deviation for replicate injections is not more than 2.0%.
Procedure—
Separately inject equal volumes (about 10 µL) of the Standard preparation and the Assay preparation into the chromatograph, record the chromatograms, and measure the responses for the major peaks. Calculate the quantity, in mg, of C22H19NO4 in the portion of Rectal Suspension taken by the formula:
100C(RU / RS)
in which C is the concentration, in mg per mL, of USP Bisacodyl RS in the Standard preparation; and RU and RS are the peak response ratios of the bisacodyl peak to the internal standard peak obtained from the Assay preparation and the Standard preparation, respectively.
Auxiliary Information—
Please check for your question in the FAQs before contacting USP.
| Topic/Question | Contact | Expert Committee |
|---|---|---|
| Monograph | Elena Gonikberg, Ph.D.
Principal Scientific Liaison 1-301-816-8251 |
(SM32010) Monographs - Small Molecules 3 |
| Reference Standards | RS Technical Services 1-301-816-8129 rstech@usp.org |
USP35–NF30 Page 2365