Acyclovir Ointment
» Acyclovir Ointment contains not less than 90.0 percent and not more than 110.0 percent of the labeled amount of acyclovir (C8H11N5O3), in a suitable ointment base.
Packaging and storage— Preserve in tight containers. Store between 15 and 25 in a dry place.
Identification— The retention time of the major peak in the chromatogram of the Assay preparation corresponds to that in the chromatogram of the Standard preparation, as obtained in the Assay.
Microbial enumeration tests 61 and Tests for specified microorganisms 62 It meets the requirements of the tests for absence of Staphylococcus aureus and Pseudomonas aeruginosa.
Minimum fill 755: meets the requirements.
Limit of guanine—
Mobile phase and Chromatographic system— Proceed as directed in the Assay.
Standard solution— Dissolve an accurately weighed quantity of guanine in 0.1 M sodium hydroxide, and dilute quantitatively, and stepwise if necessary, with 0.1 M sodium hydroxide to obtain a solution having a known concentration of about 2.0 µg per mL.
Test solution— Use the Assay preparation.
Procedure— Separately inject equal volumes (about 20 µL) of the Standard solution and the Test solution into the chromatograph, record the chromatograms, and measure the peak responses. Calculate the percentage of guanine in the portion of Ointment taken by the formula:
100(C/D)(rU / rS)
in which C is the concentration, in mg per mL, of guanine in the Standard solution; D is the concentration, in mg per mL, of acyclovir in the Test solution; and rU and rS are the guanine peak responses obtained from the Test solution and the Standard solution, respectively: not more than 2.0% is found.
Assay—
Mobile phase— Prepare a filtered and degassed solution of 0.02 M acetic acid. Make adjustments if necessary (see System Suitability under Chromatography 621).
Standard preparation— Dissolve accurately weighed quantities of USP Acyclovir RS in 0.1 N sodium hydroxide, and dilute quantitatively, and stepwise if necessary, with 0.1 N sodium hydroxide to obtain a solution having known concentrations of about 0.1 mg per mL.
System suitability preparation 1— Dissolve accurately weighed quantities of USP Acyclovir RS and guanine in 0.1 N sodium hydroxide, and dilute quantitatively, and stepwise if necessary, with 0.1 N sodium hydroxide to obtain a solution having known concentration of about 0.1 mg of each per mL.
System suitability preparation 2— Dissolve an accurately weighed quantity of guanine in 0.1 N sodium hydroxide, and dilute quantitatively, and stepwise if necessary, with 0.1 N sodium hydroxide to obtain a solution having a known concentration of about 2.0 µg per mL.
Assay preparation— Transfer an accurately weighed quantity of Ointment, equivalent to about 10 mg of acyclovir, to a 100-mL volumetric flask, dissolve in and dilute with 0.1 N sodium hydroxide to volume, and mix.
Chromatographic system (see Chromatography 621)— The liquid chromatograph is equipped with a 254-nm detector and a 4.6-mm × 25-cm column that contains packing L1. The flow rate is about 3 mL per minute. Chromatograph System suitability preparation 1, and record the peak responses as directed for Procedure: the relative retention times are about 0.6 for guanine and 1.0 for acyclovir; the resolution, R, between guanine and acyclovir is not less than 2.0; and the relative standard deviation for replicate injections for acyclovir is not more than 2.0%. Chromatograph System suitability preparation 2, and record the peak responses as directed for Procedure: the relative standard deviation for replicate injections is not more than 2.0%.
Procedure— Separately inject equal volumes (about 20 µL) of the Standard preparation and the Assay preparation into the chromatograph, record the chromatograms, and measure the peak responses. Calculate the quantity, in mg, of acyclovir (C8H11N5O3) in the portion of Ointment taken by the formula:
100C(rU / rS)
in which C is the concentration, in mg per mL, of USP Acyclovir RS in the Standard preparation; and rU and rS are the peak responses obtained from the Assay preparation and the Standard preparation, respectively.
Auxiliary Information— Please check for your question in the FAQs before contacting USP.
Topic/Question Contact Expert Committee
Monograph Behnam Davani, Ph.D., M.B.A.
Senior Scientist
1-301-816-8394
(MDAA05) Monograph Development-Antivirals and Antimicrobials
Reference Standards Lili Wang, Technical Services Scientist
1-301-816-8129
RSTech@usp.org
61 Radhakrishna S Tirumalai, Ph.D.
Senior Scientist
1-301-816-8339
(MSA05) Microbiology and Sterility Assurance
62 Radhakrishna S Tirumalai, Ph.D.
Senior Scientist
1-301-816-8339
(MSA05) Microbiology and Sterility Assurance
USP32–NF27 Page 1430
Pharmacopeial Forum: Volume No. 30(2) Page 434
Chromatographic Column—
Chromatographic columns text is not derived from, and not part of, USP 32 or NF 27.