Sodium Nitrite Injection
» Sodium Nitrite Injection is a sterile solution of Sodium Nitrite in Water for Injection. It contains not less than 95.0 percent and not more than 105.0 percent of the labeled amount of NaNO2.
Packaging and storage—
Preserve in single-dose containers, of Type I glass.
USP Reference standards 
11
—
11—
USP Endotoxin RS
Identification—
It responds to the Identification tests under Sodium Nitrite.
Bacterial endotoxins 85—
It contains not more than 0.33 USP Endotoxin Unit per mg of sodium nitrite.
85—
It contains not more than 0.33 USP Endotoxin Unit per mg of sodium nitrite.
pH 791:
between 7.0 and 9.0.
791:
between 7.0 and 9.0.
Other requirements—
It meets the requirements under Injections 1.
1.
Assay—
Pipet an accurately measured volume of Injection, containing about 150 mg of sodium nitrite into a mixture of 50.0 mL of 0.1 N potassium permanganate VS, 100 mL of water, and 5 mL of sulfuric acid, immersing the tip of the pipet beneath the surface of the mixture during the addition. Warm the liquid to 40
, allow it to stand for 5 minutes, and add 25.0 mL of 0.1 N oxalic acid VS. Heat the mixture to about 80, and titrate with 0.1 N potassium permanganate VS. Each mL of 0.1 N potassium permanganate is equivalent to 3.450 mg of NaNO2.
, allow it to stand for 5 minutes, and add 25.0 mL of 0.1 N oxalic acid VS. Heat the mixture to about 80, and titrate with 0.1 N potassium permanganate VS. Each mL of 0.1 N potassium permanganate is equivalent to 3.450 mg of NaNO2.
Auxiliary Information—
Please check for your question in the FAQs before contacting USP.
| Topic/Question | Contact | Expert Committee |
|---|---|---|
| Monograph | Sujatha Ramakrishna, Ph.D.
Senior Scientific Liaison 1-301-816-8349 |
(SM22010) Monographs - Small Molecules 2 |
| Reference Standards | RS Technical Services 1-301-816-8129 rstech@usp.org |
|
| 85 |
Radhakrishna S Tirumalai, Ph.D.
Principal Scientific Liaison 1-301-816-8339 |
(GCM2010) General Chapters - Microbiology |
USP35–NF30 Page 4665