Sodium Bromide Oral Solution, Veterinary
» Sodium Bromide Oral Solution, Veterinary contains an amount of Sodium Bromide equivalent to not less than 151 mg and not more than 185 mg of bromide (Br) per mL (see Pharmaceutical Compounding—Nonsterile Preparations 795):
Sodium Bromide 21.6 g
Purified Water 60 mL
Corn Syrup, FCC, a
sufficient quantity to make
 
100 mL
Dissolve an accurately weighed quantity of Sodium Bromide in water. Add Corn Syrup to volume with mixing.
Packaging and storage— Package in a tight container, and store in a refrigerator.
Labeling— Label it to indicate that it is to be discarded after 180 days, to state that it is to be kept out of the reach of children, to indicate the nominal content of sodium bromide in the Oral Solution, Veterinary and to state that it is for veterinary use only.
USP Reference standards 11
USP Sodium Bromide RS
Beyond-use date: 180 days after the date on which it was compounded.
Assay—
Trichloroacetic acid (TCA) solution— Dissolve a quantity of TCA in water to obtain a 20% (w/v) solution.
Gold chloride solution— Dissolve a quantity of gold chloride in water to obtain a 0.5% (w/v) solution.
Blank— Use water.
Bromide standard stock solution— Dissolve an accurately weighed quantity of USP Sodium Bromide RS in water to obtain a solution having a known concentration equivalent to about 20 mg of bromide per mL.
Standard preparations— Prepare four Standard preparation solutions of known concentrations of about 2.0 mg of bromide per mL, 1.0 mg of bromide per mL, 0.5 mg of bromide per mL, and 0.25 mg of bromide per mL, respectively, by diluting quantitatively the Bromide standard stock solution with the appropriate volumes of water.
Assay preparation— Dilute Oral Solution, Veterinary quantitatively with water (1:99).
Procedure (see Spectrophotometry and Light Scattering 851) To 750-µL aliquots each of Blank, the four Standard preparations, and the Assay preparation add 500 µL of Trichloroacetic acid (TCA) solution and 250 µL of Gold chloride solution. Mix on a vortex mixer, and immediately read the absorbance at 440 nm. Generate a standard curve of absorbance versus bromide concentration, correcting for the blank, and calculate the regression line and the regression coefficient. The test is considered valid if the square of the correlation coefficient of the regression curve (r2) is not less than 0.99. Calculate the concentration, in mg per mL, of bromide (Br) in the portion of Oral Solution, Veterinary taken by the formula:
100C
in which C is the concentration, in mg per mL, of bromide in the Assay preparation as calculated from the regression line.
Auxiliary Information— Please check for your question in the FAQs before contacting USP.
Topic/Question Contact Expert Committee
Monograph Jeanne H. Sun
Assistant Scientific Liaison
1-301-816-3361
(CMP2010) Compounding
Reference Standards RS Technical Services
1-301-816-8129
rstech@usp.org
USP35–NF30 Page 4651
Pharmacopeial Forum: Volume No. 33(5) Page 950